Forestry machine hydraulics – common faults and how to prevent them
ZT Forest Market
Leaks, overheating, contaminated oil and worn pumps – the causes of hydraulic problems on harvesters and forwarders.
Hydraulics power the crane, the head and often the drive of a forestry machine. Failures mean downtime and high costs – and most of them can be prevented.
Most common problems
Leaks
- chafed hoses at bending points and where branches rub,
- worn cylinder seals,
- loose or damaged fittings.
Even a small leak means lost oil, a dirty machine and a fire risk near hot parts.
Contaminated oil
The most common cause of premature pump and valve wear. Sources: loose caps, worn tank breathers, dirt getting in during hose replacement.
Overheating
Clogged coolers, the wrong oil or overloading lower oil viscosity and speed up wear.
Loss of performance
Slower crane movements or weaker feed in the head are often a sign of a worn pump or hydraulic motor.
Prevention
- Daily checks of hoses and fittings.
- Cleanliness during service – caps on open lines, clean funnels and containers.
- Filter changes on schedule.
- Oil analysis – detects contamination, water and metal wear before a failure.
- Clean coolers – especially in dusty seasons.
- Hose guards where lines are exposed to rubbing.
When buying a machine
Inspect the crane and head for leaks, check the oil temperature after longer work and ask for analysis results. More tips in our used harvester buying checklist.