How to inspect a harvester head
ZT Forest Market
A practical guide to inspecting a head: rotator, knives, feed rollers, saw, measuring sensors and hydraulics.
The head is the heart of a harvester and the part that wears fastest. When buying a machine – or just a head – it deserves extra attention.
Rotator and suspension
- Check play in the rotator and link – move the head with hydraulics switched off.
- Inspect bushings and pins; visible ovalisation means replacement is coming.
- Look for leaks at the rotator.
Delimbing knives and feed rollers
- Knives should close tightly around the stem; chipped edges reduce delimbing quality.
- Check rollers (steel or rubber) for worn spikes and cracks.
- Test the roller hydraulic motors – loss of feed force is a common issue on older heads.
Saw unit
- Condition of the bar, drive sprocket and chain tensioning,
- chain lubrication system,
- the topping saw, if fitted – is it there and does it work.
Sensors and measurement
Accurate measurement is money. Test:
- the length sensor (measuring wheel) – no slipping or play,
- diameter measurement – compare readings with manual measurements on several logs,
- calibration in the control system.
Hydraulics
Look for leaks on knife and roller cylinders, hoses and the valve block. Chafed hoses at bending points should be replaced.
If you are considering buying just a head, see our harvester heads, e.g. a serviced Ponsse H7.