How to test a machine during inspection – a step-by-step test drive
ZT Forest Market
An on-site test plan for a harvester or forwarder: cold start, driving, crane and head work, and a test under load.
A walk-around on the yard is not enough. A forestry machine shows its real condition only when working – under load and fully warmed up. Here is a test plan worth following.
1. Cold start
- Ask for the machine not to be started before you arrive – a warm engine hides starting problems.
- Watch the exhaust smoke, listen to the engine and note the cranking time.
- Check the display for fault messages.
2. Driving
- Drive a few hundred metres off-road if possible.
- Check acceleration, braking and steering in both directions.
- Listen for knocking in the articulation joint and bogies.
- Test the differential locks.
3. Crane
- Make full movements in all directions, including simultaneously.
- Extend the crane to full reach and check that it does not creep down when stopped.
- Assess play in the pins and slewing unit.
4. Head (harvester) or grapple (forwarder)
- If possible, fell and process a few trees, or at least rotate a log and feed it through the head.
- Check the saw, knives, rollers and measurement.
- On a forwarder, load and unload a full bunk.
5. After work
- Check hydraulic oil and coolant temperatures.
- Walk around the machine again looking for new leaks.
- Download the fault report from the machine's computer.
Complement the test with our used harvester buying checklist. Want to arrange an inspection of a machine from our offers? Contact us.